ISO1410DW vs ADM2461EBRWZ-RL 비교

다음의 상세 나란히 비교: ISO1410DW 제조: Texas Instruments 및 ADM2461EBRWZ-RL 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
ADM2461EBRWZ-RL ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI

ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI

ADM2461EBRWZ-RL ✓ 활성

사양 비교

파라미터 ISO1410DW ADM2461EBRWZ-RL
브랜드 Texas Instruments Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Device Type 1/1 isolated RS-422 and RS-485 transceiver —
Maximum Data Rate 500 Kbps 500 kbps
Isolation Voltage 5 kVrms —
Isolation Type Galvanic isolation —
Bus Compatibility TIA/EIA RS-485 and RS-422 —
Duplex Mode Half-duplex —
EMC Protection EMC protected —
동작 온도 범위 -40°C to +125°C —
패키지 16-pin wide-body SOIC (DW) 16-SOIC_W (Wide Body, 7.5 mm creepage)
실장 유형 Surface mount Surface Mount
Number of Transceivers 1 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Logic-Side Supply Voltage [DATA_NEEDED: logic-side supply voltage] —
Bus-Side Supply Voltage [DATA_NEEDED: bus-side supply voltage] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] -25 V to +25 V
Output Differential Voltage [DATA_NEEDED: output differential voltage] —
Receiver Sensitivity [DATA_NEEDED: receiver sensitivity] —
Propagation Delay [DATA_NEEDED: propagation delay] —
ESD Protection Bus pins endure high levels of IEC electrostatic discharge events —
EFT Protection Bus pins endure high levels of IEC electrical fast transient events —
RoHS 상태 [DATA_NEEDED: RoHS compliance] Compliant
REACH Status [DATA_NEEDED: REACH compliance] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Product Type — Isolated RS-485 / RS-422 Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half Duplex
Isolation Voltage (rms) — 5.7 kV rms
ESD Protection (Bus Pins) — ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2)
Receiver Hysteresis — 30 mV typical
Unit Load — 1/8 (up to 256 nodes)
Supply Voltage - Logic Side (VDD1) — 3.0 V to 5.5 V
Supply Voltage - Bus Side (VDD2) — 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver)
동작 온도 — -40C to +85C
MSL 레벨 — 3

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청