ISO1450BDW vs ISO1450BDWR Comparación
Comparación detallada lado a lado de ISO1450BDW por Texas Instruments y ISO1450BDWR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
ISO1450BDW - 50Mbps 5kVrms RS-485/422 Isolated Transceiver | TI
ISO1450BDW ✓ ActivoTexas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ ActivoComparación de especificaciones
| Parámetro | ISO1450BDW | ISO1450BDWR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $4,10 | $2,95 |
| Protocol | RS-422, RS-485 (TIA/EIA-485-A, TIA/EIA-422-B) | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | Half |
| Maximum Data Rate | 50 Mbps | — |
| Isolation Voltage (rms) | 5000 Vrms (per UL 1577) | 5 kVrms (reinforced) |
| Working Isolation Voltage (VIOWM) | 1060 Vrms | — |
| Surge Isolation Voltage (VIOSM) | 10000 Vpk | — |
| Integrated Isolated Power | No | — |
| Supply Voltage (VCC1, VCC2) | 3 V to 5.5 V [DATA_NEEDED: each rail tolerance] | — |
| Bus Common-Mode Voltage Range | -7 V to +12 V [DATA_NEEDED: confirmed in datasheet] | — |
| Bus Pins ESD (IEC 61000-4-2) | [DATA_NEEDED: contact/air discharge level] | — |
| Bus Pins EFT (IEC 61000-4-4) | [DATA_NEEDED: transient level] | — |
| Rango de temperatura de funcionamiento | -40 C to +125 C | — |
| Encapsulado | SOIC-16 wide-body (DW) | SOIC-16 wide-body (DW), 16 pins |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 2 (1 year floor life) [DATA_NEEDED: confirm from datasheet] | 3 (per JEDEC J-STD-020) |
| Estado RoHS | Compliant | Compliant |
| Función | — | Isolated half-duplex RS-485 / RS-422 transceiver |
| Data Rate (max) | — | 50 Mbps |
| Number of Drivers / Receivers | — | 1/1 |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| Bus Pin ESD (HBM) | — | ±4 kV |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Unit Load | — | 1/8 (up to 256 nodes on bus) |
| Common-Mode Range | — | Wide common-mode bus voltage range (per datasheet) |
| Apagado térmico | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| Temperatura de funcionamiento | — | -40C to +125C |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |