ISP452HUMA1 vs BTS51202EKAXUMA1 Comparación
Comparación detallada lado a lado de ISP452HUMA1 por Infineon y BTS51202EKAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ISP452HUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,92 | $1,68 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| Switch Configuration | High-side, N-channel | — |
| Configuración de salida | 1:1 | — |
| Continuous Load Current | 700 mA | — |
| Operating Supply Voltage (Vbb) | 5 V to 52 V | — |
| On-State Resistance R_DS(on) | [DATA_NEEDED: typical R_DS(on) value] | — |
| Input Logic Compatibility | CMOS, ground-referenced, µC compatible | — |
| Quiescent Current (standby) | [DATA_NEEDED: Iq value] | — |
| Built-in Protections | Short-circuit, over-temperature, over-voltage | — |
| Diagnostic Output | Open-drain status feedback | Yes (status feedback pin) |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: full range, datasheet covers -40C to +125C typical for industrial grade] | — |
| Encapsulado | PG-SOT223-4 (SOT-223-4) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Technology | Smart SIPMOS (vertical DMOS + charge pump + logic) | Smart6 (N-channel vertical MOSFET with charge pump) |
| Estado RoHS | Compliant | Compliant |
| Load Types Supported | Resistive, inductive, capacitive | — |
| Topología | — | Dual High-Side Switch (2 channels) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Temperatura de funcionamiento | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |