ISP452HUMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de ISP452HUMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ISP452HUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,92 | $1,68 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| Switch Configuration | High-side, N-channel | — |
| Configuration de sortie | 1:1 | — |
| Continuous Load Current | 700 mA | — |
| Operating Supply Voltage (Vbb) | 5 V to 52 V | — |
| On-State Resistance R_DS(on) | [DATA_NEEDED: typical R_DS(on) value] | — |
| Input Logic Compatibility | CMOS, ground-referenced, µC compatible | — |
| Quiescent Current (standby) | [DATA_NEEDED: Iq value] | — |
| Built-in Protections | Short-circuit, over-temperature, over-voltage | — |
| Diagnostic Output | Open-drain status feedback | Yes (status feedback pin) |
| Plage de température de fonctionnement | [DATA_NEEDED: full range, datasheet covers -40C to +125C typical for industrial grade] | — |
| Boîtier | PG-SOT223-4 (SOT-223-4) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Technology | Smart SIPMOS (vertical DMOS + charge pump + logic) | Smart6 (N-channel vertical MOSFET with charge pump) |
| Statut RoHS | Compliant | Compliant |
| Load Types Supported | Resistive, inductive, capacitive | — |
| Topologie | — | Dual High-Side Switch (2 channels) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |