ITS4142NHUMA1 vs BTS70021EPPXUMA1 Comparación
Comparación detallada lado a lado de ITS4142NHUMA1 por Infineon y BTS70021EPPXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ ActivoComparación de especificaciones
| Parámetro | ITS4142NHUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,88 | $1,32 |
| Manufacturer | Infineon Technologies | — |
| Product Type | Smart High-Side Power Switch | — |
| Topología | 1:1 N-Channel High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Número de salidas | 1 | — |
| Continuous Load Current | 1.4 A | — |
| On-Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) at 25C] | — |
| Tensión de alimentación de funcionamiento | 5 V to 34 V (load-dump tolerant to 45 V) | — |
| Logic Input Voltage | Logic-level, 3.3 V and 5 V compatible | — |
| Overvoltage Protection | Yes, including load dump | — |
| Undervoltage Shutdown | Yes, with auto-restart and hysteresis | — |
| Short Circuit Protection | Yes, with current limitation | — |
| Overload Protection | Yes | Yes (current limit) |
| Apagado térmico | Yes | — |
| Diagnostic Feedback | Yes, open-drain status output | — |
| Inductive Load Switching | Yes, with internal clamping | — |
| Temperatura de funcionamiento | -40C to +125C (junction) | — |
| Encapsulado | PG-SOT223-4 (4-pin SOT-223) | PG-TSDSO-14-22 (exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | Compliant | Compliant (Green Product) |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive grade variant status] | — |
| Product Family | — | PROFET+2 12V |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | — | 6 V to 18 V |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Standby Current | — | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| Open-Load Detection | — | Yes (on-state and off-state) |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Rango de temperatura de funcionamiento | — | -40 C to +150 C junction |
| Qualification | — | AEC-Q100 automotive qualified |