ITS4142NHUMA1 vs BTS70021EPPXUMA1 Comparison
Detailed side-by-side comparison of ITS4142NHUMA1 by Infineon and BTS70021EPPXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTS70021EPPXUMA1
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 β ActiveSpecification Comparison
| Parameter | ITS4142NHUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.88 | $1.32 |
| Manufacturer | Infineon Technologies | β |
| Product Type | Smart High-Side Power Switch | β |
| Topology | 1:1 N-Channel High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Number of Outputs | 1 | β |
| Continuous Load Current | 1.4 A | β |
| On-Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) at 25C] | β |
| Operating Supply Voltage | 5 V to 34 V (load-dump tolerant to 45 V) | β |
| Logic Input Voltage | Logic-level, 3.3 V and 5 V compatible | β |
| Overvoltage Protection | Yes, including load dump | β |
| Undervoltage Shutdown | Yes, with auto-restart and hysteresis | β |
| Short Circuit Protection | Yes, with current limitation | β |
| Overload Protection | Yes | Yes (current limit) |
| Thermal Shutdown | Yes | β |
| Diagnostic Feedback | Yes, open-drain status output | β |
| Inductive Load Switching | Yes, with internal clamping | β |
| Operating Temperature | -40C to +125C (junction) | β |
| Package | PG-SOT223-4 (4-pin SOT-223) | PG-TSDSO-14-22 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant (Green Product) |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive grade variant status] | β |
| Product Family | β | PROFET+2 12V |
| Maximum Continuous Load Current | β | 21 A |
| On-State Resistance (RDS(on)) | β | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | β | 6 V to 18 V |
| Transient Supply Voltage | β | 28 V (load dump tolerant) |
| Standby Current | β | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | β | Analog proportional load current |
| Fault Output (DEN/IN) | β | Yes, latched |
| Reverse Polarity Protection | β | Yes (ReverSave) |
| Short-Circuit Protection | β | Yes (latched) |
| Over-Temperature Protection | β | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | β | Yes |
| Load Dump Clamp Voltage | β | 41 V typical |
| Open-Load Detection | β | Yes (on-state and off-state) |
| PWM Capability | β | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Operating Temperature Range | β | -40 C to +150 C junction |
| Qualification | β | AEC-Q100 automotive qualified |