KSZ9021RLI vs KSZ9021RL Comparación
Comparación detallada lado a lado de KSZ9021RLI por Microchip Technology y KSZ9021RL por Microchip Technology. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Microchip Technology
KSZ9021RLI - Gigabit Ethernet PHY Transceiver, RGMII, 64-LQFP-EP | Microchip
KSZ9021RLI ✓ ActivoComparación de especificaciones
| Parámetro | KSZ9021RLI | KSZ9021RL |
|---|---|---|
| Marca | Microchip Technology | Microchip Technology |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Unknown |
| Función | 10/100/1000Base-T Ethernet PHY Transceiver | — |
| Number of Drivers/Receivers | 8/8 | — |
| Velocidad de datos | 10 Mbps / 100 Mbps / 1000 Mbps | — |
| Protocol | Gigabit Ethernet IEEE 802.3 | — |
| IC Interface Type | GMII, MII, RGMII | — |
| Tensión de alimentación | 3.135 V to 3.465 V (3.3V nominal) | 3.3 V |
| Core/Logic Voltage | 1.14 V to 1.26 V (internal LDO) / 3.3 V interface | — |
| Temperatura de funcionamiento | -40C to +85C (Industrial) | — |
| Encapsulado | 64-LQFP-EP (10x10 mm) with Exposed Pad | 64-pin lead-free E-LQFP |
| Tipo de montaje | Surface Mount | Surface mount |
| Auto-Negotiation | Yes (10/100/1000) | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Cable Diagnostics | LinkMD TDR-based | — |
| Energy Efficient Ethernet | IEEE 802.3az supported | — |
| Nivel MSL | [DATA_NEEDED: MSL Level] | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Termination | On-chip 100-ohm | — |
| Product Type | — | Single-port Gigabit Ethernet physical-layer transceiver |
| Supported Ethernet Speeds | — | 10 Mb/s, 100 Mb/s, and 1000 Mb/s |
| Supported Physical Standards | — | 10BASE-T, 100BASE-TX, and 1000BASE-T |
| Cable Medium | — | Standard CAT-5 unshielded twisted pair |
| MAC Interface | — | RGMII |
| Reference Clock Output | — | 125 MHz on CLK125_NDO |
| Auto-Negotiation Protocol | — | IEEE 802.3 Clause 28 |
| Recuento de pines | — | 64 pins |
| Maximum Link Speed | — | 1000 Mbps |
| Transceiver Configuration | — | Single port |
| Lead-Free Status | — | Lead-free |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Digital I/O Supply | — | [DATA_NEEDED: digital I/O supply voltage] |
| Analog Supply | — | [DATA_NEEDED: analog supply voltage] |
| Typical Current Consumption | — | [DATA_NEEDED: typical current consumption] |
| Junction Temperature | — | [DATA_NEEDED: junction temperature rating] |