KSZ9021RLI vs KSZ9021RL Comparaison
Comparaison détaillée côte à côte de KSZ9021RLI par Microchip Technology et KSZ9021RL par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ9021RLI - Gigabit Ethernet PHY Transceiver, RGMII, 64-LQFP-EP | Microchip
KSZ9021RLI ✓ ActifComparaison des spécifications
| Paramètre | KSZ9021RLI | KSZ9021RL |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Unknown |
| Fonction | 10/100/1000Base-T Ethernet PHY Transceiver | — |
| Number of Drivers/Receivers | 8/8 | — |
| Débit de données | 10 Mbps / 100 Mbps / 1000 Mbps | — |
| Protocol | Gigabit Ethernet IEEE 802.3 | — |
| IC Interface Type | GMII, MII, RGMII | — |
| Tension d'alimentation | 3.135 V to 3.465 V (3.3V nominal) | 3.3 V |
| Core/Logic Voltage | 1.14 V to 1.26 V (internal LDO) / 3.3 V interface | — |
| Température de fonctionnement | -40C to +85C (Industrial) | — |
| Boîtier | 64-LQFP-EP (10x10 mm) with Exposed Pad | 64-pin lead-free E-LQFP |
| Type de montage | Surface Mount | Surface mount |
| Auto-Negotiation | Yes (10/100/1000) | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Cable Diagnostics | LinkMD TDR-based | — |
| Energy Efficient Ethernet | IEEE 802.3az supported | — |
| Niveau MSL | [DATA_NEEDED: MSL Level] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Termination | On-chip 100-ohm | — |
| Product Type | — | Single-port Gigabit Ethernet physical-layer transceiver |
| Supported Ethernet Speeds | — | 10 Mb/s, 100 Mb/s, and 1000 Mb/s |
| Supported Physical Standards | — | 10BASE-T, 100BASE-TX, and 1000BASE-T |
| Cable Medium | — | Standard CAT-5 unshielded twisted pair |
| MAC Interface | — | RGMII |
| Reference Clock Output | — | 125 MHz on CLK125_NDO |
| Auto-Negotiation Protocol | — | IEEE 802.3 Clause 28 |
| Nombre de broches | — | 64 pins |
| Maximum Link Speed | — | 1000 Mbps |
| Transceiver Configuration | — | Single port |
| Lead-Free Status | — | Lead-free |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Digital I/O Supply | — | [DATA_NEEDED: digital I/O supply voltage] |
| Analog Supply | — | [DATA_NEEDED: analog supply voltage] |
| Typical Current Consumption | — | [DATA_NEEDED: typical current consumption] |
| Junction Temperature | — | [DATA_NEEDED: junction temperature rating] |