LM2904PW vs LM339PWRG4 Comparación
Comparación detallada lado a lado de LM2904PW por Texas Instruments y LM339PWRG4 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | LM2904PW | LM339PWRG4 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Number of Amplifiers | 2 circuits | — |
| Product Type | Dual general-purpose operational amplifier | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | — |
| Typical Supply Current | 0.7 mA | — |
| Supply-Current Independence | Independent of supply voltage | — |
| Supported Supply Configurations | Single supply or split supply | — |
| Common-Mode Input Range | Includes ground | — |
| Architecture | Voltage feedback, internally frequency compensated | — |
| Encapsulado | 8-TSSOP, 4.40 mm width | 14-TSSOP, 4.40 mm width |
| Package Length | 4.40 mm | — |
| Tipo de montaje | Surface mount | Surface mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | 0 °C to [DATA_NEEDED: maximum operating temperature] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: typical input-bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Comparator Type | — | General-purpose differential comparator |
| Number of Channels | — | 4 channels |
| Supply Configuration | — | Single supply or dual supply |
| Supply Voltage Range | — | [DATA_NEEDED: operating supply-voltage range] |
| Maximum-Rated Supply Voltage | — | 30 V for non-V devices |
| Tested Supply Voltage | — | 32 V for non-V devices |
| Typical Supply-Current Drain | — | 0.8 mA |
| Common-Mode Input Voltage Range | — | Includes ground |
| Differential Input Voltage Range | — | Equal to maximum-rated supply voltage |
| Tipo de salida | — | Open collector |
| Logic Compatibility | — | Compatible with TTL, MOS, and CMOS |
| Output Saturation Voltage | — | Low; exact value not stated |
| Recuento de pines | — | 14 pins |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |