LM324D vs LM324KD Comparación
Comparación detallada lado a lado de LM324D por Texas Instruments y LM324KD por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ ActivoComparación de especificaciones
| Parámetro | LM324D | LM324KD |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Quad general-purpose operational amplifier | Quad general-purpose operational amplifier |
| Number of Amplifiers | 4 | — |
| Architecture | Four independent high-gain frequency-compensated operational amplifiers | — |
| Supply Voltage Range | 3 V to 36 V for B versions | — |
| Input Offset Voltage | Plus or minus 2 mV maximum for BA versions at 25 C | — |
| ESD Protection | 2 kV HBM for B, BA, and K versions | 2 kV |
| Input Filtering | Internal RF and EMI filter for B and BA versions | — |
| Supply Configuration | Single supply or split supply | — |
| Frequency Compensation | Internal | — |
| Encapsulado | 14-pin SOIC | 14-SOIC (0.154 inch, 3.90 mm width) |
| Tipo de montaje | Surface mount | Surface mount |
| Device Type | Low-power operational amplifier | — |
| Input Type | Differential input | — |
| Tipo de salida | Single-ended output | — |
| Operating Class | Standard general purpose | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 20 nA |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | Includes ground |
| Output Swing | [DATA_NEEDED: output swing] | — |
| Number of Channels | — | 4 circuits |
| Maximum Supply Voltage | — | 30 V |
| Single-Supply Operating Range | — | 3 V to 32 V |
| Dual-Supply Operating Range | — | ±1.5 V to ±16 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Output Current per Channel | — | 60 mA |
| Instrumentation Amplifier Gain | — | 65 dB |
| Corriente de alimentación | — | 0.5 uA |
| Recuento de pines | — | 14 pins |
| Operating Voltage Range | — | 3 V to 32 V |
| Supply Drain | — | Low and independent of supply voltage |