LM324D vs LM324KD Comparaison
Comparaison détaillée côte à côte de LM324D par Texas Instruments et LM324KD par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ ActifComparaison des spécifications
| Paramètre | LM324D | LM324KD |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Quad general-purpose operational amplifier | Quad general-purpose operational amplifier |
| Number of Amplifiers | 4 | — |
| Architecture | Four independent high-gain frequency-compensated operational amplifiers | — |
| Supply Voltage Range | 3 V to 36 V for B versions | — |
| Input Offset Voltage | Plus or minus 2 mV maximum for BA versions at 25 C | — |
| ESD Protection | 2 kV HBM for B, BA, and K versions | 2 kV |
| Input Filtering | Internal RF and EMI filter for B and BA versions | — |
| Supply Configuration | Single supply or split supply | — |
| Frequency Compensation | Internal | — |
| Boîtier | 14-pin SOIC | 14-SOIC (0.154 inch, 3.90 mm width) |
| Type de montage | Surface mount | Surface mount |
| Device Type | Low-power operational amplifier | — |
| Input Type | Differential input | — |
| Type de sortie | Single-ended output | — |
| Operating Class | Standard general purpose | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 20 nA |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | Includes ground |
| Output Swing | [DATA_NEEDED: output swing] | — |
| Number of Channels | — | 4 circuits |
| Maximum Supply Voltage | — | 30 V |
| Single-Supply Operating Range | — | 3 V to 32 V |
| Dual-Supply Operating Range | — | ±1.5 V to ±16 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Output Current per Channel | — | 60 mA |
| Instrumentation Amplifier Gain | — | 65 dB |
| Courant d'alimentation | — | 0.5 uA |
| Nombre de broches | — | 14 pins |
| Operating Voltage Range | — | 3 V to 32 V |
| Supply Drain | — | Low and independent of supply voltage |