MAX1480CCPI+ vs MAX1480BCPI+ Comparación
Comparación detallada lado a lado de MAX1480CCPI+ por Maxim Integrated y MAX1480BCPI+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Maxim Integrated
MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated
MAX1480CCPI+ ✓ ActivoAnalog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ ActivoComparación de especificaciones
| Parámetro | MAX1480CCPI+ | MAX1480BCPI+ |
|---|---|---|
| Marca | Maxim Integrated | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Isolated RS-485/RS-422 transceiver | — |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Duplex Mode | Half duplex | — |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Isolation | Galvanically isolated logic-side and bus-side interfaces | — |
| Driver Slew Rate | Reduced slew rate | — |
| Supported Standards | RS-485 and RS-422 | — |
| Encapsulado | 28-pin DIP, 0.600 in (15.24 mm) width | 28-PDIP (0.600", 15.24 mm wide) |
| Tipo de montaje | Through-hole | Through-Hole |
| Logic-Side Supply | Single 5 V supply powers both sides of the interface | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Isolation Voltage | [DATA_NEEDED: isolation withstand voltage] | 1000 Vrms (galvanic, transformer-based) |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Estado RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Velocidad de datos | — | 250 kbps |
| Receiver Hysteresis | — | 70 mV |
| Supply Voltage (Logic Side) | — | 5 V (single supply) |
| Temperatura de funcionamiento | — | -40C to +85C |
| Number of Nodes on Bus | — | Up to 32 transceivers |
| Slew Rate | — | Reduced (low-EMI drivers) |
| Construction | — | Hybrid microcircuit (CMOS + pulse transformer) |
| Lead-Free / Halogen-Free | — | [DATA_NEEDED: lead-free / halogen-free status] |