MAX1480CCPI+ vs MAX1480BCPI+ Comparaison
Comparaison détaillée côte à côte de MAX1480CCPI+ par Maxim Integrated et MAX1480BCPI+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ ActifComparaison des spécifications
| Paramètre | MAX1480CCPI+ | MAX1480BCPI+ |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Isolated RS-485/RS-422 transceiver | — |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Duplex Mode | Half duplex | — |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Isolation | Galvanically isolated logic-side and bus-side interfaces | — |
| Driver Slew Rate | Reduced slew rate | — |
| Supported Standards | RS-485 and RS-422 | — |
| Boîtier | 28-pin DIP, 0.600 in (15.24 mm) width | 28-PDIP (0.600", 15.24 mm wide) |
| Type de montage | Through-hole | Through-Hole |
| Logic-Side Supply | Single 5 V supply powers both sides of the interface | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Isolation Voltage | [DATA_NEEDED: isolation withstand voltage] | 1000 Vrms (galvanic, transformer-based) |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Statut RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Débit de données | — | 250 kbps |
| Receiver Hysteresis | — | 70 mV |
| Supply Voltage (Logic Side) | — | 5 V (single supply) |
| Température de fonctionnement | — | -40C to +85C |
| Number of Nodes on Bus | — | Up to 32 transceivers |
| Slew Rate | — | Reduced (low-EMI drivers) |
| Construction | — | Hybrid microcircuit (CMOS + pulse transformer) |
| Lead-Free / Halogen-Free | — | [DATA_NEEDED: lead-free / halogen-free status] |