MAX232NSR vs MAX232DR Comparación
Comparación detallada lado a lado de MAX232NSR por Texas Instruments y MAX232DR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
MAX232NSR - 2/2 RS-232 Transceiver, 120 kbps | Texas Instruments (Tape & Reel)
MAX232NSR ✓ ActivoTexas Instruments
MAX232DR - 5V Dual RS-232 Transceiver, 120kbps, SOIC-16 | TI (Tape & Reel)
MAX232DR ✓ ActivoComparación de especificaciones
| Parámetro | MAX232NSR | MAX232DR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-232 dual transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Maximum Data Rate | 120 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Typical Receiver Threshold | 1.3 V | — |
| Receiver Hysteresis | 500 mV | — |
| Maximum Receiver Input Voltage | ±30 V | — |
| Temperatura de funcionamiento | 0 °C to 70 °C (TA) | 0 C to +70 C (commercial grade) |
| Encapsulado | 16-pin SOIC, 0.209-inch body width | SOIC-16 (D) |
| Tipo de montaje | Surface mount | Surface Mount |
| Integrated Voltage Generator | Yes, capacitive charge-pump voltage generator | — |
| Supported Supply Configuration | Single 5 V supply | — |
| Logic Interface | TTL/CMOS | — |
| Signal Standard | TIA/EIA-232-F | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Función | — | Dual RS-232 line driver/receiver (2/2 transceiver, full) |
| Velocidad de datos | — | 120 kbps |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V |
| Corriente de alimentación | — | 8 mA typical |
| Receiver Input Levels | — | +/-30 V tolerant |
| Charge Pump Capacitors Required | — | 4 external (typically 1 uF) |
| Generated RS-232 Rails | — | Approx. +/-9 V to +/-10 V from internal charge pump |
| Compliance | — | TIA/EIA-232-F, ITU V.28 |
| ESD Protection (RS-232 pins) | — | [DATA_NEEDED: datasheet ESD figure] |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free] |
| Interchangeable With | — | Maxim MAX232 (industry-standard die) |