MAX232NSR vs MAX232DR Comparaison
Comparaison détaillée côte à côte de MAX232NSR par Texas Instruments et MAX232DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX232NSR - 2/2 RS-232 Transceiver, 120 kbps | Texas Instruments (Tape & Reel)
MAX232NSR ✓ ActifTexas Instruments
MAX232DR - 5V Dual RS-232 Transceiver, 120kbps, SOIC-16 | TI (Tape & Reel)
MAX232DR ✓ ActifComparaison des spécifications
| Paramètre | MAX232NSR | MAX232DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-232 dual transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Maximum Data Rate | 120 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Typical Receiver Threshold | 1.3 V | — |
| Receiver Hysteresis | 500 mV | — |
| Maximum Receiver Input Voltage | ±30 V | — |
| Température de fonctionnement | 0 °C to 70 °C (TA) | 0 C to +70 C (commercial grade) |
| Boîtier | 16-pin SOIC, 0.209-inch body width | SOIC-16 (D) |
| Type de montage | Surface mount | Surface Mount |
| Integrated Voltage Generator | Yes, capacitive charge-pump voltage generator | — |
| Supported Supply Configuration | Single 5 V supply | — |
| Logic Interface | TTL/CMOS | — |
| Signal Standard | TIA/EIA-232-F | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Fonction | — | Dual RS-232 line driver/receiver (2/2 transceiver, full) |
| Débit de données | — | 120 kbps |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V |
| Courant d'alimentation | — | 8 mA typical |
| Receiver Input Levels | — | +/-30 V tolerant |
| Charge Pump Capacitors Required | — | 4 external (typically 1 uF) |
| Generated RS-232 Rails | — | Approx. +/-9 V to +/-10 V from internal charge pump |
| Compliance | — | TIA/EIA-232-F, ITU V.28 |
| ESD Protection (RS-232 pins) | — | [DATA_NEEDED: datasheet ESD figure] |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free] |
| Interchangeable With | — | Maxim MAX232 (industry-standard die) |