MAX3221IDBRG4 vs MAX3221IDBR Comparación
Comparación detallada lado a lado de MAX3221IDBRG4 por Texas Instruments y MAX3221IDBR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
MAX3221IDBRG4 - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221IDBRG4 ✓ ActivoComparación de especificaciones
| Parámetro | MAX3221IDBRG4 | MAX3221IDBR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Single-channel RS-232 line driver and receiver | Single-channel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s | 250 kbps |
| Number of Drivers | 1 | 1 |
| Number of Receivers | 1 | 1 |
| ESD Protection | ±15 kV HBM on RS-232 bus pins | ±15 kV HBM on serial-port connection pins, including GND |
| Low Standby Current | 1 µA typical | — |
| External Charge-Pump Capacitors | 4 × 0.1 µF | 4 × 0.1 µF |
| 5 V Logic Input Compatibility | Accepted with 3.3 V supply | — |
| RS-232 Compliance | Meets or exceeds TIA/EIA-232-F | TIA/EIA-232-F and ITU V.28 |
| ITU Compliance | Meets or exceeds ITU V.28 | — |
| Encapsulado | 16-pin SSOP | 16-pin SSOP |
| Tipo de montaje | Surface mount | Surface mount |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Line Driver Output Type | [DATA_NEEDED: line driver output type] | — |
| Typical Standby Current | — | 1 µA |
| Receiver Enable Control | — | 1 dedicated enable input |
| Logic Input Compatibility | — | Accepts 5 V logic input with 3.3 V supply |
| Charge-Pump Architecture | — | Dual charge-pump circuit |