MAX3221IDBRG4 vs MAX3221IDBR So sánh
So sánh chi tiết song song của MAX3221IDBRG4 bằng Texas Instruments và MAX3221IDBR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
MAX3221IDBRG4 - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221IDBRG4 ✓ Hoạt độngTexas Instruments
MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IDBR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX3221IDBRG4 | MAX3221IDBR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Single-channel RS-232 line driver and receiver | Single-channel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s | 250 kbps |
| Number of Drivers | 1 | 1 |
| Number of Receivers | 1 | 1 |
| ESD Protection | ±15 kV HBM on RS-232 bus pins | ±15 kV HBM on serial-port connection pins, including GND |
| Low Standby Current | 1 µA typical | — |
| External Charge-Pump Capacitors | 4 × 0.1 µF | 4 × 0.1 µF |
| 5 V Logic Input Compatibility | Accepted with 3.3 V supply | — |
| RS-232 Compliance | Meets or exceeds TIA/EIA-232-F | TIA/EIA-232-F and ITU V.28 |
| ITU Compliance | Meets or exceeds ITU V.28 | — |
| Hộp | 16-pin SSOP | 16-pin SSOP |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Line Driver Output Type | [DATA_NEEDED: line driver output type] | — |
| Typical Standby Current | — | 1 µA |
| Receiver Enable Control | — | 1 dedicated enable input |
| Logic Input Compatibility | — | Accepts 5 V logic input with 3.3 V supply |
| Charge-Pump Architecture | — | Dual charge-pump circuit |