MAX3485ECPA+ vs MAX3485EPA+ Comparación
Comparación detallada lado a lado de MAX3485ECPA+ por Analog Devices y MAX3485EPA+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX3485ECPA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECPA+ ✓ ActivoComparación de especificaciones
| Parámetro | MAX3485ECPA+ | MAX3485EPA+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 interface transceiver |
| Tensión de alimentación | 3.3 V | — |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating] |
| Transceiver Configuration | 1 driver / 1 receiver | — |
| Communication Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | RS-422 and RS-485 |
| Driver Architecture | Slew-rate-limited | — |
| Encapsulado | 8-pin PDIP | 8-pin PDIP |
| Tipo de montaje | Through-hole | Through-hole |
| ESD Protection Level | ±15 kV | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Shutdown Supply Current | [DATA_NEEDED: shutdown supply current] | — |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Transmission Data Rate | — | Up to 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Driver Protection | — | Short-circuit current limiting and thermal shutdown |
| Driver Output State During Thermal Shutdown | — | High impedance |
| Driver Slew Control | — | Slew-rate limited |
| Receiver Fail-Safe Feature | — | Yes |
| Operating Voltage | — | 3.3 V nominal |
| Power Dissipation | — | [DATA_NEEDED: power dissipation specification] |
| Temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |