MAX3485ECPA+ vs MAX3485EPA+ So sánh

So sánh chi tiết song song của MAX3485ECPA+ bằng Analog Devices và MAX3485EPA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3485ECPA+ MAX3485ECPA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECPA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECPA+ ✓ Hoạt động
Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3485ECPA+ MAX3485EPA+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485/RS-422 transceiver RS-485/RS-422 interface transceiver
Điện áp cung cấp 3.3 V —
Maximum Data Rate 12 Mbps —
ESD Protection ±15 kV [DATA_NEEDED: ESD protection rating]
Transceiver Configuration 1 driver / 1 receiver —
Communication Mode Half-duplex —
Supported Standards RS-422 and RS-485 RS-422 and RS-485
Driver Architecture Slew-rate-limited —
Hộp 8-pin PDIP 8-pin PDIP
Kiểu lắp đặt Through-hole Through-hole
ESD Protection Level ±15 kV —
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS status]
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Điện áp cung cấp [DATA_NEEDED: supply current] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Differential Threshold [DATA_NEEDED: receiver differential threshold] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Shutdown Supply Current [DATA_NEEDED: shutdown supply current] —
Supply Voltage Range — 3 V to 3.6 V
Transmission Data Rate — Up to 10 Mbps
Driver Count — 1
Receiver Count — 1
Driver Protection — Short-circuit current limiting and thermal shutdown
Driver Output State During Thermal Shutdown — High impedance
Driver Slew Control — Slew-rate limited
Receiver Fail-Safe Feature — Yes
Operating Voltage — 3.3 V nominal
Power Dissipation — [DATA_NEEDED: power dissipation specification]
Nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá