MMA6260QR2 vs MMA6233QR2 Comparación
Comparación detallada lado a lado de MMA6260QR2 por NXP Semiconductors y MMA6233QR2 por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoleteComparación de especificaciones
| Parámetro | MMA6260QR2 | MMA6233QR2 |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Motion Sensors | Motion Sensors |
| Estado del ciclo de vida | Obsolete | Obsolete |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $4,65 | $4,77 |
| Type | Accelerometer, Dual Axis (X, Y) | — |
| Acceleration Range | ±1.5 g | — |
| Axis | X, Y (dual) | — |
| Sensitivity | [DATA_NEEDED: sensitivity V/g] | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) |
| Bandwidth | 50 Hz (1-pole low-pass, factory set) | 900 Hz (maximum) |
| Tipo de salida | Analog, ratiometric | Analog, ratiometric |
| Tensión de alimentación | [DATA_NEEDED: Vdd range] | — |
| Corriente de alimentación | [DATA_NEEDED: Idd] | 2.5 mA (typical, [DATA_NEEDED: max]) |
| Self-Test | Yes (logic-high on ST pin) | Yes (active-high logic input) |
| g-Select Pins | Yes (4 sensitivity options) | — |
| Temperatura de funcionamiento | -40 °C to +85 °C | -20C to +85C |
| Encapsulado | 16-QFN-EP (6x6 mm) | 16-pin QFN-EP (6x6 mm) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | RoHS Compliant (per Digchip) | Compliant |
| Lead Status | Contains Lead (per Digchip, prior to conversion) | — |
| Tipo de sensor | — | Accelerometer, Dual-Axis (X, Y) |
| Full-Scale Range | — | ±10g (±6g via g-select) |
| Output Voltage at 0g | — | VDD/2 |
| Supply Voltage (VDD) | — | 3.0 V to 5.25 V |
| Densidad de ruido | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FS] |
| g-Select Input | — | Yes (±10g or ±6g selection) |
| Filter Type | — | 1-pole low-pass (factory-set cut-off) |
| Lead-Free Status | — | Contains Lead (NXP datasheet note) |
| Nivel MSL | — | [DATA_NEEDED: MSL rating] |