MMA6260QR2 vs MMA6233QR2 Comparaison
Comparaison détaillée côte à côte de MMA6260QR2 par NXP Semiconductors et MMA6233QR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoleteComparaison des spécifications
| Paramètre | MMA6260QR2 | MMA6233QR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,65 | $4,77 |
| Type | Accelerometer, Dual Axis (X, Y) | — |
| Acceleration Range | ±1.5 g | — |
| Axis | X, Y (dual) | — |
| Sensitivity | [DATA_NEEDED: sensitivity V/g] | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) |
| Bandwidth | 50 Hz (1-pole low-pass, factory set) | 900 Hz (maximum) |
| Type de sortie | Analog, ratiometric | Analog, ratiometric |
| Tension d'alimentation | [DATA_NEEDED: Vdd range] | — |
| Courant d'alimentation | [DATA_NEEDED: Idd] | 2.5 mA (typical, [DATA_NEEDED: max]) |
| Self-Test | Yes (logic-high on ST pin) | Yes (active-high logic input) |
| g-Select Pins | Yes (4 sensitivity options) | — |
| Température de fonctionnement | -40 °C to +85 °C | -20C to +85C |
| Boîtier | 16-QFN-EP (6x6 mm) | 16-pin QFN-EP (6x6 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | RoHS Compliant (per Digchip) | Compliant |
| Lead Status | Contains Lead (per Digchip, prior to conversion) | — |
| Type de capteur | — | Accelerometer, Dual-Axis (X, Y) |
| Full-Scale Range | — | ±10g (±6g via g-select) |
| Output Voltage at 0g | — | VDD/2 |
| Supply Voltage (VDD) | — | 3.0 V to 5.25 V |
| Densité de bruit | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FS] |
| g-Select Input | — | Yes (±10g or ±6g selection) |
| Filter Type | — | 1-pole low-pass (factory-set cut-off) |
| Lead-Free Status | — | Contains Lead (NXP datasheet note) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |