MPXHZ6115AC6T1 vs MPXH6115AC6T1 Comparación
Comparación detallada lado a lado de MPXHZ6115AC6T1 por NXP Semiconductors y MPXH6115AC6T1 por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MPXHZ6115AC6T1 - 15-115kPa Absolute Pressure Sensor | NXP | SSOP-8
MPXHZ6115AC6T1 ✓ ActivoSTMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ ActivoComparación de especificaciones
| Parámetro | MPXHZ6115AC6T1 | MPXH6115AC6T1 |
|---|---|---|
| Marca | NXP Semiconductors | STMicroelectronics |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $6,65 | $5,85 |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) absolute | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Maximum Overpressure | 400 kPa (58.02 PSI) | — |
| Rango de tensión de salida | 0.2 V to 4.7 V (at 5 V supply) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Sensitivity | 45.9 mV/kPa (nominal) | — |
| Pressure Type | Absolute | Absolute |
| Port Style | Top port, male 0.13 inch (3.3 mm) tube | — |
| Tipo de salida | Analog, ratiometric to VCC | Analog, ratiometric |
| Temperatura de funcionamiento | -40 °C to +125 °C | -40 C to +125 C |
| Encapsulado | 8-SSOP (0.335 inch, 8.50 mm width), top port | — |
| Termination Style | Gull wing, surface mount | — |
| Media Protection | Media Resistant Gel coating | — |
| On-Chip Signal Conditioning | Yes (bipolar op-amp + thin-film network) | — |
| Temperature Compensation | On-chip, calibrated | — |
| Automotive Qualification | AEC-Q100 | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0.2 V to 4.7 V (at VCC = 5.0 V) |
| Corriente de alimentación | — | [DATA_NEEDED: typical supply current] |
| Accuracy | — | 1.5% (over compensated temperature range) |
| Temperature Compensation Range | — | -40 C to +125 C |
| Encapsulado / Carcasa | — | 8-SSOP (0.335", 8.50 mm width), Top Port |
| Pressure Port | — | Male 0.13" (3.3 mm) tube, top-side |
| Tipo de montaje | — | Surface Mount |
| Media Compatibility | — | Dry gases (non-corrosive) |
| Estado RoHS | — | Compliant |
| Nivel MSL | — | [DATA_NEEDED: MSL level] |