MPXHZ6115AC6T1 vs MPXH6115AC6T1 对比
详细并排对比 MPXHZ6115AC6T1 出自 NXP Semiconductors 和 MPXH6115AC6T1 出自 STMicroelectronics。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
NXP Semiconductors
MPXHZ6115AC6T1 - 15-115kPa Absolute Pressure Sensor | NXP | SSOP-8
MPXHZ6115AC6T1 ✓ 量产中STMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ 量产中规格对比
| 参数 | MPXHZ6115AC6T1 | MPXH6115AC6T1 |
|---|---|---|
| 品牌 | NXP Semiconductors | STMicroelectronics |
| 分类 | Pressure Sensors | Pressure Sensors |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $6.65 | $5.85 |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) absolute | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Maximum Overpressure | 400 kPa (58.02 PSI) | — |
| 输出电压范围 | 0.2 V to 4.7 V (at 5 V supply) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Sensitivity | 45.9 mV/kPa (nominal) | — |
| Pressure Type | Absolute | Absolute |
| Port Style | Top port, male 0.13 inch (3.3 mm) tube | — |
| 输出类型 | Analog, ratiometric to VCC | Analog, ratiometric |
| 工作温度 | -40 °C to +125 °C | -40 C to +125 C |
| 封装 | 8-SSOP (0.335 inch, 8.50 mm width), top port | — |
| Termination Style | Gull wing, surface mount | — |
| Media Protection | Media Resistant Gel coating | — |
| On-Chip Signal Conditioning | Yes (bipolar op-amp + thin-film network) | — |
| Temperature Compensation | On-chip, calibrated | — |
| Automotive Qualification | AEC-Q100 | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0.2 V to 4.7 V (at VCC = 5.0 V) |
| 电源电流 | — | [DATA_NEEDED: typical supply current] |
| Accuracy | — | 1.5% (over compensated temperature range) |
| Temperature Compensation Range | — | -40 C to +125 C |
| 封装 / 外壳 | — | 8-SSOP (0.335", 8.50 mm width), Top Port |
| Pressure Port | — | Male 0.13" (3.3 mm) tube, top-side |
| 安装类型 | — | Surface Mount |
| Media Compatibility | — | Dry gases (non-corrosive) |
| RoHS 状态 | — | Compliant |
| MSL 等级 | — | [DATA_NEEDED: MSL level] |