NE5532P vs NE5532ANG Comparación
Comparación detallada lado a lado de NE5532P por Texas Instruments y NE5532ANG por onsemi. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | NE5532P | NE5532ANG |
|---|---|---|
| Marca | Texas Instruments | onsemi |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Count | 2 amplifiers | — |
| Product Type | Dual low-noise operational amplifier | — |
| Maximum Supply Voltage | 30 V | — |
| Supply Voltage Range | ±5 V to ±15 V | — |
| Unity-Gain Bandwidth | 10 MHz typical | [DATA_NEEDED: unity-gain bandwidth] |
| Slew Rate | 9 V/µs typical | [DATA_NEEDED: slew rate] |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| High DC Voltage Gain | 100 V/mV typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical with VCC = ±18 V and RL = 600 ohm | — |
| Input Offset Voltage | 4000 µV maximum | [DATA_NEEDED: input offset voltage] |
| Process Technology | Bipolar | — |
| Encapsulado | 8-pin PDIP (P) | 8-pin PDIP |
| Tipo de montaje | Through hole | Through-hole |
| Temperatura de funcionamiento | 0 °C to 70 °C | — |
| Primary Application | Audio | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Dual internally compensated operational amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Tensión de alimentación de funcionamiento | — | 3 V to 20 V |
| Total Pin Count | — | 8 pins |
| Noise Classification | — | Low-noise operational amplifier |
| Compensation | — | Internal |
| Primary Application Category | — | Audio and instrumentation amplification |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Input Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |