NE5532P vs NE5532ANG Comparaison
Comparaison détaillée côte à côte de NE5532P par Texas Instruments et NE5532ANG par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | NE5532P | NE5532ANG |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Count | 2 amplifiers | — |
| Product Type | Dual low-noise operational amplifier | — |
| Maximum Supply Voltage | 30 V | — |
| Supply Voltage Range | ±5 V to ±15 V | — |
| Unity-Gain Bandwidth | 10 MHz typical | [DATA_NEEDED: unity-gain bandwidth] |
| Slew Rate | 9 V/µs typical | [DATA_NEEDED: slew rate] |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| High DC Voltage Gain | 100 V/mV typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical with VCC = ±18 V and RL = 600 ohm | — |
| Input Offset Voltage | 4000 µV maximum | [DATA_NEEDED: input offset voltage] |
| Process Technology | Bipolar | — |
| Boîtier | 8-pin PDIP (P) | 8-pin PDIP |
| Type de montage | Through hole | Through-hole |
| Température de fonctionnement | 0 °C to 70 °C | — |
| Primary Application | Audio | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Dual internally compensated operational amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Tension d'alimentation de fonctionnement | — | 3 V to 20 V |
| Total Pin Count | — | 8 pins |
| Noise Classification | — | Low-noise operational amplifier |
| Compensation | — | Internal |
| Primary Application Category | — | Audio and instrumentation amplification |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Input Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |