NE5534P vs NE5534DRE4 Comparación
Comparación detallada lado a lado de NE5534P por Texas Instruments y NE5534DRE4 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5534DRE4 - Single Low-Noise Op Amp 10MHz | Texas Instruments
NE5534DRE4 ✓ ActivoComparación de especificaciones
| Parámetro | NE5534P | NE5534DRE4 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Single operational amplifier | Low-Noise Operational Amplifier |
| Tensión de alimentación | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz (typical) |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | — |
| Slew Rate | 13 V/µs typical | 13 V/μs (typical) |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| DC Voltage Gain | 100 V/V typical | — |
| Output Voltage Swing | 32 V peak-to-peak typical with VCC = ±18 V and RL = 600 Ω | — |
| Number of Amplifiers | 1 | — |
| Encapsulado | 8-pin PDIP | 8-pin SOIC (D) |
| Tipo de montaje | Through-hole | Surface Mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -55 °C to +125 °C |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Estado RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| Conflict Minerals Status | unknown | — |
| Number of Channels | — | 1 Circuit |
| Input Voltage Noise Density | — | 3.5 nV/√Hz (typical) |
| Common-Mode Rejection Ratio (CMRR) | — | 100 dB (typical) |
| DC Open-Loop Voltage Gain | — | 100 V/mV (typical) |
| Peak-to-Peak Output Voltage Swing | — | 32 V (typical, ±18V supply, 600 Ω load) |
| Supply Voltage Range (Dual) | — | ±3 V to ±20 V |
| Supply Voltage Range (Single) | — | 6 V to 40 V |
| Packaging | — | Tape and Reel (DRE4 suffix) |