PCF8575DW vs PCA9675D Comparación
Comparación detallada lado a lado de PCF8575DW por Texas Instruments y PCA9675D por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | PCF8575DW | PCA9675D |
|---|---|---|
| Marca | Texas Instruments | NXP Semiconductors |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | Remote 16-bit I2C/SMBus I/O expander | — |
| Number of I/O Lines | 16 | 16 lines |
| Supply Voltage Range | 2.5 V to 5.5 V | 2.3 V to 5.5 V |
| I2C Maximum Clock Frequency | 400 kHz | — |
| Interfaz | I2C/SMBus | — |
| Interrupt Output | Open-drain | — |
| Hardware Address Pins | 3 | — |
| Maximum Addressable Devices | 8 devices | — |
| Standby Current | 10 uA maximum | — |
| Tipo de salida | Latched | — |
| Output Drive Capability | High-current drive capability | — |
| Output High Configuration | Current source to VCC for active-high drive | — |
| Rango de temperatura de funcionamiento | -40 C to +85 C | — |
| Encapsulado | 24-pin SOIC | 24-pin SOIC, 7.50 mm width |
| Package Type | SOIC | 24-SO |
| Número de pines | 24 | — |
| Estado RoHS | RoHS-compliant | unknown |
| Tensión de alimentación | 3.3 V | — |
| Standby-Current Consumption | 10 uA maximum | — |
| I2C Bus Speed | 400 kHz fast mode | 1 MHz |
| Addressing Method | Three hardware address pins | — |
| Input/Output Configuration | General-purpose remote digital I/O | — |
| Product Type | — | Remote 16-bit I/O expander |
| Bus Interface | — | I2C two-wire bidirectional bus |
| I2C Mode | — | Fast-mode Plus (Fm+) |
| I2C Bus Drive | — | 30 mA |
| Interrupt Function | — | Supported |
| Packaging | — | Tube |
| Tipo de montaje | — | Surface mount |
| Temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Output Drive Configuration | — | [DATA_NEEDED: output configuration for each port] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |