PCF8575DW vs PCA9675D Comparaison
Comparaison détaillée côte à côte de PCF8575DW par Texas Instruments et PCA9675D par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | PCF8575DW | PCA9675D |
|---|---|---|
| Marque | Texas Instruments | NXP Semiconductors |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Remote 16-bit I2C/SMBus I/O expander | — |
| Number of I/O Lines | 16 | 16 lines |
| Supply Voltage Range | 2.5 V to 5.5 V | 2.3 V to 5.5 V |
| I2C Maximum Clock Frequency | 400 kHz | — |
| Interface | I2C/SMBus | — |
| Interrupt Output | Open-drain | — |
| Hardware Address Pins | 3 | — |
| Maximum Addressable Devices | 8 devices | — |
| Standby Current | 10 uA maximum | — |
| Type de sortie | Latched | — |
| Output Drive Capability | High-current drive capability | — |
| Output High Configuration | Current source to VCC for active-high drive | — |
| Plage de température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 24-pin SOIC | 24-pin SOIC, 7.50 mm width |
| Package Type | SOIC | 24-SO |
| Nombre de broches | 24 | — |
| Statut RoHS | RoHS-compliant | unknown |
| Tension d'alimentation | 3.3 V | — |
| Standby-Current Consumption | 10 uA maximum | — |
| I2C Bus Speed | 400 kHz fast mode | 1 MHz |
| Addressing Method | Three hardware address pins | — |
| Input/Output Configuration | General-purpose remote digital I/O | — |
| Product Type | — | Remote 16-bit I/O expander |
| Bus Interface | — | I2C two-wire bidirectional bus |
| I2C Mode | — | Fast-mode Plus (Fm+) |
| I2C Bus Drive | — | 30 mA |
| Interrupt Function | — | Supported |
| Packaging | — | Tube |
| Type de montage | — | Surface mount |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Output Drive Configuration | — | [DATA_NEEDED: output configuration for each port] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |