PCM5100APWR vs PCM5102APWR Comparación

Comparación detallada lado a lado de PCM5100APWR por Texas Instruments y PCM5102APWR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Texas Instruments
PCM5100APWR PCM5100APWR - 32-Bit Stereo DAC | Texas Instruments

PCM5100APWR - 32-Bit Stereo DAC | Texas Instruments

PCM5100APWR ✓ Activo
Texas Instruments
PCM5102APWR PCM5102APWR - 2VRMS 112dB Stereo DAC w/ PLL | TI

PCM5102APWR - 2VRMS 112dB Stereo DAC w/ PLL | TI

PCM5102APWR ✓ Activo

Comparación de especificaciones

Parámetro PCM5100APWR PCM5102APWR
Marca Texas Instruments Texas Instruments
Categoría ADC/DAC ADC/DAC
Estado del ciclo de vida Activo Activo
Device Type Stereo audio digital-to-analog converter —
Supported PCM Word Lengths 16 bit, 24 bit, 32 bit —
Maximum Sampling Rate 384 kHz —
Dynamic Range 100 dB 112 dB
Tipo de salida DirectPath stereo line output Ground-centered, cap-free
Maximum Output Voltage 2.1 Vrms —
Minimum Output Load 1 kΩ —
Tensión de alimentación de funcionamiento 3 V to 3.6 V —
Digital Audio Interface I2S-compatible serial PCM interface —
Clock Architecture Integrated audio PLL with BCK reference and internal SCK generation —
Bias Architecture Integrated negative charge pump —
Output DC-Blocking Capacitors Not required for DirectPath operation —
Channel Count 2 channels —
Recuento de pines 20 pins —
Package Type 20-pin TSSOP —
Tipo de montaje Surface mount Surface Mount
Ruido de salida Ultra-low out-of-band noise; numerical value [DATA_NEEDED: output noise specification] —
Total Harmonic Distortion plus Noise [DATA_NEEDED: THD+N specification] —
Rango de temperatura de funcionamiento [DATA_NEEDED: operating temperature range] —
Estado RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Product Type — Stereo Audio DAC
Resolución — 32-bit
THD+N — 100 dB (typical)
Tensión de salida — 2.1 VRMS (DirectPath)
Sample Rate — 8 kHz to 384 kHz
Digital Interface — I2S, LJ, RJ, DSP (PCM)
Supply Voltage (DVDD) — 3.3 V
Integrated PLL — Yes (BCLK-only operation supported)
Control Interface — Hardware pins / I2C
Encapsulado — TSSOP-20 (PW)
Temperatura de funcionamiento — -25C to +85C
Nivel MSL — Level-1-260C-UNLIM

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización