PCM5100APWR vs PCM5102APWR Comparaison

Comparaison détaillée côte à côte de PCM5100APWR par Texas Instruments et PCM5102APWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
PCM5100APWR PCM5100APWR - 32-Bit Stereo DAC | Texas Instruments

PCM5100APWR - 32-Bit Stereo DAC | Texas Instruments

PCM5100APWR ✓ Actif
Texas Instruments
PCM5102APWR PCM5102APWR - 2VRMS 112dB Stereo DAC w/ PLL | TI

PCM5102APWR - 2VRMS 112dB Stereo DAC w/ PLL | TI

PCM5102APWR ✓ Actif

Comparaison des spécifications

Paramètre PCM5100APWR PCM5102APWR
Marque Texas Instruments Texas Instruments
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Actif Actif
Device Type Stereo audio digital-to-analog converter —
Supported PCM Word Lengths 16 bit, 24 bit, 32 bit —
Maximum Sampling Rate 384 kHz —
Dynamic Range 100 dB 112 dB
Type de sortie DirectPath stereo line output Ground-centered, cap-free
Maximum Output Voltage 2.1 Vrms —
Minimum Output Load 1 kΩ —
Tension d'alimentation de fonctionnement 3 V to 3.6 V —
Digital Audio Interface I2S-compatible serial PCM interface —
Clock Architecture Integrated audio PLL with BCK reference and internal SCK generation —
Bias Architecture Integrated negative charge pump —
Output DC-Blocking Capacitors Not required for DirectPath operation —
Channel Count 2 channels —
Nombre de broches 20 pins —
Package Type 20-pin TSSOP —
Type de montage Surface mount Surface Mount
Bruit de sortie Ultra-low out-of-band noise; numerical value [DATA_NEEDED: output noise specification] —
Total Harmonic Distortion plus Noise [DATA_NEEDED: THD+N specification] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Statut RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Product Type — Stereo Audio DAC
Résolution — 32-bit
THD+N — 100 dB (typical)
Tension de sortie — 2.1 VRMS (DirectPath)
Sample Rate — 8 kHz to 384 kHz
Digital Interface — I2S, LJ, RJ, DSP (PCM)
Supply Voltage (DVDD) — 3.3 V
Integrated PLL — Yes (BCLK-only operation supported)
Control Interface — Hardware pins / I2C
Boîtier — TSSOP-20 (PW)
Température de fonctionnement — -25C to +85C
Niveau MSL — Level-1-260C-UNLIM

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis