PN7160A1HN vs PN7161B1HN-C100Y Comparación
Comparación detallada lado a lado de PN7160A1HN por NXP Semiconductors y PN7161B1HN-C100Y por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
PN7161B1HN-C100Y - NFC Controller with NCI Interface | NXP
PN7161B1HN-C100Y ✓ ActivoComparación de especificaciones
| Parámetro | PN7160A1HN | PN7161B1HN-C100Y |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | RF Modules | RF Transceivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,15 | $3,74 |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | — |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | — |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | SPI (NCI) |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | — |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| Encapsulado | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad (HVQFN-40, 6 mm x 6 mm) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | 260 C |
| Moisture Sensitivity Level | MSL 3 | — |
| Estado RoHS | Compliant | Compliant |
| Temperatura de funcionamiento | -30 C to +85 C | -40 C to +85 C |
| Función | — | NFC Controller with NCI interface |
| RF Frequency | — | 13.56 MHz |
| Supported Standards | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMVCo |
| Supply Voltage (VDD) | — | 1.65 V to 1.95 V |
| Supply Voltage (VBAT/VIN) | — | 3.0 V to 3.6 V |
| Nivel de sensibilidad a la humedad (MSL) | — | 3 |
| EMVCo Compliance | — | EMV L1 compliant |
| Apple ECP Support | — | Yes (after formal authorization) |
| Lead-Free | — | Yes |
| Protocol | — | NFCIP-1, NFCIP-2 |
| Antenna Outputs | — | Single-ended TX, differential RX |
| Integrated LDO | — | Yes (RF supply) |