PN7160A1HN vs PN7161B1HN-C100Y Comparaison
Comparaison détaillée côte à côte de PN7160A1HN par NXP Semiconductors et PN7161B1HN-C100Y par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
PN7161B1HN-C100Y - NFC Controller with NCI Interface | NXP
PN7161B1HN-C100Y ✓ ActifComparaison des spécifications
| Paramètre | PN7160A1HN | PN7161B1HN-C100Y |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | RF Modules | RF Transceivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,15 | $3,74 |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | — |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | — |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | SPI (NCI) |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | — |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| Boîtier | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad (HVQFN-40, 6 mm x 6 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | 260 C |
| Moisture Sensitivity Level | MSL 3 | — |
| Statut RoHS | Compliant | Compliant |
| Température de fonctionnement | -30 C to +85 C | -40 C to +85 C |
| Fonction | — | NFC Controller with NCI interface |
| RF Frequency | — | 13.56 MHz |
| Supported Standards | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMVCo |
| Supply Voltage (VDD) | — | 1.65 V to 1.95 V |
| Supply Voltage (VBAT/VIN) | — | 3.0 V to 3.6 V |
| Niveau de sensibilité à l'humidité (MSL) | — | 3 |
| EMVCo Compliance | — | EMV L1 compliant |
| Apple ECP Support | — | Yes (after formal authorization) |
| Lead-Free | — | Yes |
| Protocol | — | NFCIP-1, NFCIP-2 |
| Antenna Outputs | — | Single-ended TX, differential RX |
| Integrated LDO | — | Yes (RF supply) |