SI8710BC-B-IS vs SI8715BC-A-IS Comparación
Comparación detallada lado a lado de SI8710BC-B-IS por Skyworks Solutions y SI8715BC-A-IS por Skyworks Solutions. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Skyworks Solutions
SI8715BC-A-IS - 3.75 kV 1-Ch Digital Isolator 15 Mbps SOIC-8 | Skyworks
SI8715BC-A-IS ✓ ActivoComparación de especificaciones
| Parámetro | SI8710BC-B-IS | SI8715BC-A-IS |
|---|---|---|
| Marca | Skyworks Solutions | Skyworks Solutions |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,95 | $1,41 |
| Función | Single-channel digital isolator (LED emulator input, open-collector output) | — |
| Number of Channels | 1 | 1 |
| Velocidad de datos | 15 Mbps (maximum) | — |
| Propagation Delay | 60 ns (maximum) | — |
| Isolation Voltage | 3750 Vrms | — |
| Common-Mode Transient Immunity (CMTI) | 35 kV/us (minimum), >50 kV/us (typical) | >50 kV/us (typical) |
| Supply Voltage (VDD) | 3 V to 30 V | — |
| Input Type | LED emulator (current-driven) | — |
| Tipo de salida | Open-collector | — |
| Encapsulado | 8-SOIC (0.154 inch, 3.90 mm width) | 8-SOIC (0.154", 3.90 mm width) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Temperatura de funcionamiento | -40C to +125C | — |
| Inputs - Side 1 / Side 2 | 1 / 0 | — |
| Technology | CMOS capacitive isolation | — |
| Estado RoHS | Compliant | Compliant |
| Isolation Voltage (1 min) | — | 3750 Vrms |
| Isolation Type | — | Capacitive / RF carrier (LED emulator input) |
| Directionality | — | Unidirectional (input to output) |
| Maximum Data Rate | — | 15 Mbps |
| Output Supply Voltage | — | 2.5 V to 5.5 V |
| Propagation Delay (typ.) | — | 50 ns |
| Input Drive | — | Current-driven emulated LED (external resistor required) |
| Rango de temperatura de funcionamiento | — | -40 to +125 C |
| Nivel MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free status] |
| FIT Rate Advantage vs Optocoupler | — | Approximately 10x lower |
| Pin-to-Pin Optocoupler Replacement | — | Yes (drop-in) |