SI8710BC-B-IS vs SI8715BC-A-IS Comparação
Comparação detalhada lado a lado de SI8710BC-B-IS por Skyworks Solutions e SI8715BC-A-IS por Skyworks Solutions. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Skyworks Solutions
SI8715BC-A-IS - 3.75 kV 1-Ch Digital Isolator 15 Mbps SOIC-8 | Skyworks
SI8715BC-A-IS ✓ AtivoComparação de especificações
| Parâmetro | SI8710BC-B-IS | SI8715BC-A-IS |
|---|---|---|
| Marca | Skyworks Solutions | Skyworks Solutions |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,95 | $1,41 |
| Função | Single-channel digital isolator (LED emulator input, open-collector output) | — |
| Number of Channels | 1 | 1 |
| Taxa de dados | 15 Mbps (maximum) | — |
| Propagation Delay | 60 ns (maximum) | — |
| Isolation Voltage | 3750 Vrms | — |
| Common-Mode Transient Immunity (CMTI) | 35 kV/us (minimum), >50 kV/us (typical) | >50 kV/us (typical) |
| Supply Voltage (VDD) | 3 V to 30 V | — |
| Input Type | LED emulator (current-driven) | — |
| Tipo de saída | Open-collector | — |
| Encapsulamento | 8-SOIC (0.154 inch, 3.90 mm width) | 8-SOIC (0.154", 3.90 mm width) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Temperatura de operação | -40C to +125C | — |
| Inputs - Side 1 / Side 2 | 1 / 0 | — |
| Technology | CMOS capacitive isolation | — |
| Status RoHS | Compliant | Compliant |
| Isolation Voltage (1 min) | — | 3750 Vrms |
| Isolation Type | — | Capacitive / RF carrier (LED emulator input) |
| Directionality | — | Unidirectional (input to output) |
| Maximum Data Rate | — | 15 Mbps |
| Output Supply Voltage | — | 2.5 V to 5.5 V |
| Propagation Delay (typ.) | — | 50 ns |
| Input Drive | — | Current-driven emulated LED (external resistor required) |
| Faixa de temperatura de operação | — | -40 to +125 C |
| Nível MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free status] |
| FIT Rate Advantage vs Optocoupler | — | Approximately 10x lower |
| Pin-to-Pin Optocoupler Replacement | — | Yes (drop-in) |