SN65HVD05D vs MAX485EESA+T Comparación

Comparación detallada lado a lado de SN65HVD05D por Texas Instruments y MAX485EESA+T por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Texas Instruments
SN65HVD05D SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D ✓ Activo
Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ Activo

Comparación de especificaciones

Parámetro SN65HVD05D MAX485EESA+T
Marca Texas Instruments Analog Devices
Categoría Interface ICs Interface ICs
Estado del ciclo de vida Activo Activo
Product Type Half-duplex RS-422/RS-485 transceiver Half-duplex RS-485/RS-422 transceiver
Driver and Receiver Count 1 differential driver and 1 differential receiver 1 driver and 1 receiver
Supply Voltage Range 4.5 V to 5.5 V 4.75 V to 5.25 V
Minimum Differential Output Voltage 2.5 V into a 54-ohm load —
Driver Output State 3-state —
Receiver Failsafe Behavior Open-circuit, short-circuit, and idle-bus failsafe —
Unit Load Option 1/8 unit load —
Maximum Node Count Up to 256 nodes on the bus —
Bus-Pin ESD Protection Exceeds 16 kV HBM —
Driver Output Slew Rate Controlled —
Communication Mode Half-duplex Half-duplex
Standards Compatibility ANSI TIA/EIA-485-A and ISO 8482E —
Encapsulado 8-pin SOIC (D) 8-pin NSOIC/SOIC
Tipo de montaje Surface mount Surface mount
Rango de temperatura de funcionamiento [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Estado RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Nominal Supply Voltage — 5 V
Maximum Data Rate — 2.5 Mbps
Driver Output Type — Slew-rate-limited differential driver
Receiver Output Type — Differential logic-level receiver
ESD Protection — ±15 kV
Supported Standards — RS-485 and RS-422
Power Classification — Low-power transceiver
MSL — [DATA_NEEDED: moisture sensitivity level]
Maximum Bus Length — [DATA_NEEDED: maximum bus length]

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización