SN65HVD05D vs MAX485EESA+T तुलना

विस्तृत दोनों ओर की तुलना SN65HVD05D द्वारा Texas Instruments और MAX485EESA+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD05D SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D ✓ सक्रिय
Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD05D MAX485EESA+T
ब्रांड Texas Instruments Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex RS-422/RS-485 transceiver Half-duplex RS-485/RS-422 transceiver
Driver and Receiver Count 1 differential driver and 1 differential receiver 1 driver and 1 receiver
Supply Voltage Range 4.5 V to 5.5 V 4.75 V to 5.25 V
Minimum Differential Output Voltage 2.5 V into a 54-ohm load —
Driver Output State 3-state —
Receiver Failsafe Behavior Open-circuit, short-circuit, and idle-bus failsafe —
Unit Load Option 1/8 unit load —
Maximum Node Count Up to 256 nodes on the bus —
Bus-Pin ESD Protection Exceeds 16 kV HBM —
Driver Output Slew Rate Controlled —
Communication Mode Half-duplex Half-duplex
Standards Compatibility ANSI TIA/EIA-485-A and ISO 8482E —
पैकेज 8-pin SOIC (D) 8-pin NSOIC/SOIC
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Nominal Supply Voltage — 5 V
Maximum Data Rate — 2.5 Mbps
Driver Output Type — Slew-rate-limited differential driver
Receiver Output Type — Differential logic-level receiver
ESD Protection — ±15 kV
Supported Standards — RS-485 and RS-422
Power Classification — Low-power transceiver
MSL — [DATA_NEEDED: moisture sensitivity level]
Maximum Bus Length — [DATA_NEEDED: maximum bus length]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध