SN65HVD234DR vs TJA1042 Comparación
Comparación detallada lado a lado de SN65HVD234DR por Texas Instruments y TJA1042 por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ Activo
Comparación de especificaciones
| Parámetro | SN65HVD234DR | TJA1042 |
|---|---|---|
| Marca | Texas Instruments | NXP Semiconductors |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,30 | $0,61 |
| Product Type | CAN Bus Transceiver | — |
| Protocol | ISO 11898-1 CAN 2.0A/B | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Logic Supply Voltage (VIO) | Not required (3.3V logic) | — |
| Maximum Signaling Rate | 1 Mbps | — |
| Number of Drivers/Receivers | 1/1 | — |
| Bus Fault Protection | +/-36 V | — |
| ESD Protection (Bus Pins, HBM) | >16 kV | — |
| Common-Mode Input Range | +/-12 V (extended) | — |
| Maximum Nodes Supported | 120 | — |
| I/O Logic Level | LVTTL, 5V-tolerant | — |
| Sleep Mode Supply Current | 0.05 uA (typical) | — |
| Standby Mode Supply Current | 370 uA (typical) | — |
| Rango de temperatura de funcionamiento | -40C to +125C | — |
| Encapsulado | SOIC-8 (D) | SOIC-8 (SOT96-1) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Modes of Operation (RS Pin) | High-speed, Slope Control, Low-power Standby | — |
| Dominant Time-Out Protection | Yes | — |
| Apagado térmico | Yes | Yes |
| Función | — | High-speed CAN transceiver with Standby mode |
| Velocidad de datos | — | Up to 5 Mbit/s (CAN FD fast phase) |
| Standards Compliance | — | ISO 11898-2:2016, SAE J2284-1 to J2284-5 |
| Number of Transceivers | — | 1 |
| Supply Voltage VCC | — | [DATA_NEEDED: VCC range] |
| Standby Mode | — | Yes, low-current wake-on-CAN |
| SPLIT Pin | — | Yes, stabilizes recessive bus level |
| Undervoltage Detection | — | On VCC |
| ESD Performance | — | Improved vs PCA82C250/TJA1040 generation |
| Temperatura de funcionamiento | — | [DATA_NEEDED: temperature range] |
| Automotive Qualification | — | Designed for automotive high-speed CAN applications |
| Predecessor Parts Replaced | — | PCA82C250, PCA82C251, TJA1040 |