SN65HVD234DR vs TJA1042 Comparaison
Comparaison détaillée côte à côte de SN65HVD234DR par Texas Instruments et TJA1042 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ Actif
Comparaison des spécifications
| Paramètre | SN65HVD234DR | TJA1042 |
|---|---|---|
| Marque | Texas Instruments | NXP Semiconductors |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,30 | $0,61 |
| Product Type | CAN Bus Transceiver | — |
| Protocol | ISO 11898-1 CAN 2.0A/B | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Logic Supply Voltage (VIO) | Not required (3.3V logic) | — |
| Maximum Signaling Rate | 1 Mbps | — |
| Number of Drivers/Receivers | 1/1 | — |
| Bus Fault Protection | +/-36 V | — |
| ESD Protection (Bus Pins, HBM) | >16 kV | — |
| Common-Mode Input Range | +/-12 V (extended) | — |
| Maximum Nodes Supported | 120 | — |
| I/O Logic Level | LVTTL, 5V-tolerant | — |
| Sleep Mode Supply Current | 0.05 uA (typical) | — |
| Standby Mode Supply Current | 370 uA (typical) | — |
| Plage de température de fonctionnement | -40C to +125C | — |
| Boîtier | SOIC-8 (D) | SOIC-8 (SOT96-1) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Modes of Operation (RS Pin) | High-speed, Slope Control, Low-power Standby | — |
| Dominant Time-Out Protection | Yes | — |
| Arrêt thermique | Yes | Yes |
| Fonction | — | High-speed CAN transceiver with Standby mode |
| Débit de données | — | Up to 5 Mbit/s (CAN FD fast phase) |
| Standards Compliance | — | ISO 11898-2:2016, SAE J2284-1 to J2284-5 |
| Number of Transceivers | — | 1 |
| Supply Voltage VCC | — | [DATA_NEEDED: VCC range] |
| Standby Mode | — | Yes, low-current wake-on-CAN |
| SPLIT Pin | — | Yes, stabilizes recessive bus level |
| Undervoltage Detection | — | On VCC |
| ESD Performance | — | Improved vs PCA82C250/TJA1040 generation |
| Température de fonctionnement | — | [DATA_NEEDED: temperature range] |
| Automotive Qualification | — | Designed for automotive high-speed CAN applications |
| Predecessor Parts Replaced | — | PCA82C250, PCA82C251, TJA1040 |