SN65HVD73DGSR vs ADM3485EARZ Comparación

Comparación detallada lado a lado de SN65HVD73DGSR por Texas Instruments y ADM3485EARZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Texas Instruments
SN65HVD73DGSR SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR ✓ Activo
Analog Devices
ADM3485EARZ ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ ✓ Activo

Comparación de especificaciones

Parámetro SN65HVD73DGSR ADM3485EARZ
Marca Texas Instruments Analog Devices
Categoría Interface ICs Interface ICs
Estado del ciclo de vida Activo Activo
Part Number SN65HVD73DGSR —
Manufacturer Texas Instruments —
Product Type RS-485 / RS-422 Full-Duplex Transceiver RS-485/RS-422 differential line transceiver
Supply Voltage (VCC) 3.0 V to 3.6 V —
Data Rate (max) 20 Mbps —
Number of Drivers / Receivers 1 / 1 —
Duplex Full —
Receiver Hysteresis [DATA_NEEDED: typical receiver hysteresis in mV] —
Common-Mode Voltage Range [DATA_NEEDED: -7 V to +12 V typical] [DATA_NEEDED: Common-mode voltage range]
ESD Protection - HBM (bus pins) ±30 kV —
ESD Protection - IEC 61000-4-2 Contact (bus pins) ±12 kV —
Unit Load 1/8 (up to 256 nodes) —
Rango de temperatura de funcionamiento -40 °C to +125 °C [DATA_NEEDED: Operating temperature range]
Encapsulado VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD 8-pin SOIC
Tipo de montaje Surface Mount Surface mount
Estado RoHS Compliant [DATA_NEEDED: RoHS status]
Nivel MSL [DATA_NEEDED: MSL rating per JEDEC J-STD-020] —
Enable Pins DE (driver enable, active-high); RE (receiver enable, active-low) —
Tensión de alimentación — 3.3 V
Maximum Data Rate — 12 Mbps
ESD Protection — ±15 kV
Duplex Mode — Half-duplex
Communication Standard — EIA RS-485 and TIA/EIA RS-422
Bus Configuration — Multipoint bus transmission
Driver Enable Control — Yes
Receiver Enable Control — Yes
Low-Power Operation — Yes
Corriente en reposo — [DATA_NEEDED: Quiescent current]
Corriente de apagado — [DATA_NEEDED: Shutdown current]
Receiver Input Resistance — [DATA_NEEDED: Receiver input resistance]
REACH Status — [DATA_NEEDED: REACH status]

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización