SN65HVD73DGSR vs ADM3485EARZ Comparaison

Comparaison détaillée côte à côte de SN65HVD73DGSR par Texas Instruments et ADM3485EARZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
SN65HVD73DGSR SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR ✓ Actif
Analog Devices
ADM3485EARZ ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ ✓ Actif

Comparaison des spécifications

Paramètre SN65HVD73DGSR ADM3485EARZ
Marque Texas Instruments Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Part Number SN65HVD73DGSR —
Manufacturer Texas Instruments —
Product Type RS-485 / RS-422 Full-Duplex Transceiver RS-485/RS-422 differential line transceiver
Supply Voltage (VCC) 3.0 V to 3.6 V —
Data Rate (max) 20 Mbps —
Number of Drivers / Receivers 1 / 1 —
Duplex Full —
Receiver Hysteresis [DATA_NEEDED: typical receiver hysteresis in mV] —
Common-Mode Voltage Range [DATA_NEEDED: -7 V to +12 V typical] [DATA_NEEDED: Common-mode voltage range]
ESD Protection - HBM (bus pins) ±30 kV —
ESD Protection - IEC 61000-4-2 Contact (bus pins) ±12 kV —
Unit Load 1/8 (up to 256 nodes) —
Plage de température de fonctionnement -40 °C to +125 °C [DATA_NEEDED: Operating temperature range]
Boîtier VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD 8-pin SOIC
Type de montage Surface Mount Surface mount
Statut RoHS Compliant [DATA_NEEDED: RoHS status]
Niveau MSL [DATA_NEEDED: MSL rating per JEDEC J-STD-020] —
Enable Pins DE (driver enable, active-high); RE (receiver enable, active-low) —
Tension d'alimentation — 3.3 V
Maximum Data Rate — 12 Mbps
ESD Protection — ±15 kV
Duplex Mode — Half-duplex
Communication Standard — EIA RS-485 and TIA/EIA RS-422
Bus Configuration — Multipoint bus transmission
Driver Enable Control — Yes
Receiver Enable Control — Yes
Low-Power Operation — Yes
Courant de repos — [DATA_NEEDED: Quiescent current]
Courant d'arrêt — [DATA_NEEDED: Shutdown current]
Receiver Input Resistance — [DATA_NEEDED: Receiver input resistance]
REACH Status — [DATA_NEEDED: REACH status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis