SN65LBC176DR vs SN65HVD3085EDR Comparación
Comparación detallada lado a lado de SN65LBC176DR por Texas Instruments y SN65HVD3085EDR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65LBC176DR - 10Mbps RS-485 Transceiver 5V | Texas Instruments
SN65LBC176DR ✓ Activo
Comparación de especificaciones
| Parámetro | SN65LBC176DR | SN65HVD3085EDR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,27 | $0,32 |
| Función | Half-duplex RS-485/RS-422 transceiver | Low-power half-duplex RS-485 transceiver |
| Signaling Rate | 10 Mbps (max) | Up to 20 Mbps |
| Tensión de alimentación | 5 V (nominal) | 4.5 V to 5.5 V |
| Duplex | Half | — |
| Transmitters / Receivers | 1 / 1 | — |
| Protocol Compliance | ANSI TIA/EIA-485 (RS-485), ISO 8482:1987 (E) | — |
| Fault Protection | -10 V to 15 V common-mode bus range | — |
| Driver Enable | DE, active-high | — |
| Receiver Enable | RE, active-low | — |
| Technology | LinBiCMOS, low skew | — |
| Temperatura de funcionamiento | -40C to +85C | -40C to +85C |
| Encapsulado | 8-SOIC (D), 3.90 mm width | SOIC (D), 8 pins |
| Tipo de montaje | Surface Mount | Surface Mount |
| Número de pines | 8 | — |
| Bus Loading | Up to 32 unit loads (multipoint) | — |
| Estado RoHS | Compliant | Compliant (per Abacus Technologies listing) |
| Protocol | — | RS-485, RS-422 (TIA/EIA-485A compliant) |
| Duplex Mode | — | Half-duplex |
| Number of Drivers / Receivers | — | 1 / 1 |
| Receiver Hysteresis | — | Specified in manufacturer datasheet |
| Bus Pin ESD / Fault Tolerance | — | Per TIA/EIA-485A requirements |
| Driver Output Transition Time | — | Controlled (slew-limited for long cables) |
| Isolation | — | None (non-isolated) |
| Standard Packaging | — | Tape & Reel (R suffix) |
| REACH Status | — | Compliant (per Abacus Technologies listing) |