SN65LBC176DR vs SN65HVD3085EDR 比較
詳細な並列比較: SN65LBC176DR メーカー: Texas Instruments および SN65HVD3085EDR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
SN65LBC176DR - 10Mbps RS-485 Transceiver 5V | Texas Instruments
SN65LBC176DR ✓ 生産中
仕様比較
| パラメータ | SN65LBC176DR | SN65HVD3085EDR |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $1.27 | $0.32 |
| 機能 | Half-duplex RS-485/RS-422 transceiver | Low-power half-duplex RS-485 transceiver |
| Signaling Rate | 10 Mbps (max) | Up to 20 Mbps |
| 電源電圧 | 5 V (nominal) | 4.5 V to 5.5 V |
| Duplex | Half | — |
| Transmitters / Receivers | 1 / 1 | — |
| Protocol Compliance | ANSI TIA/EIA-485 (RS-485), ISO 8482:1987 (E) | — |
| Fault Protection | -10 V to 15 V common-mode bus range | — |
| Driver Enable | DE, active-high | — |
| Receiver Enable | RE, active-low | — |
| Technology | LinBiCMOS, low skew | — |
| 動作温度 | -40C to +85C | -40C to +85C |
| パッケージ | 8-SOIC (D), 3.90 mm width | SOIC (D), 8 pins |
| 実装タイプ | Surface Mount | Surface Mount |
| ピン数 | 8 | — |
| Bus Loading | Up to 32 unit loads (multipoint) | — |
| RoHS ステータス | Compliant | Compliant (per Abacus Technologies listing) |
| Protocol | — | RS-485, RS-422 (TIA/EIA-485A compliant) |
| Duplex Mode | — | Half-duplex |
| Number of Drivers / Receivers | — | 1 / 1 |
| Receiver Hysteresis | — | Specified in manufacturer datasheet |
| Bus Pin ESD / Fault Tolerance | — | Per TIA/EIA-485A requirements |
| Driver Output Transition Time | — | Controlled (slew-limited for long cables) |
| Isolation | — | None (non-isolated) |
| Standard Packaging | — | Tape & Reel (R suffix) |
| REACH Status | — | Compliant (per Abacus Technologies listing) |