SN75176 vs ADM485JN Comparación
Comparación detallada lado a lado de SN75176 por Texas Instruments y ADM485JN por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ ActivoComparación de especificaciones
| Parámetro | SN75176 | ADM485JN |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Función | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| Temperatura de funcionamiento | 0 °C to +70 °C | — |
| Driver Output Current | ±60 mA (max) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| Encapsulado | 8-pin PDIP (P) | 8-pin PDIP |
| Tipo de montaje | Through-Hole | Through-hole |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | EIA RS-485 and RS-422 |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Tensión de alimentación | — | +5 V |
| Maximum Data Rate | — | 5 Mbit/s |
| Bus Common-Mode Range | — | +12 V |
| Driver Propagation Delay | — | 10 ns |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Driver Skew | — | Zero skew |
| Driver and Receiver Enable | — | Both driver and receiver can be enabled independently |
| Protection | — | Short-circuit protection and thermal shutdown protection |
| Process Technology | — | BiCMOS |
| Temperature Range | — | Commercial and industrial range |
| REACH Status | — | [DATA_NEEDED: REACH status] |