SN75176 vs ADM485JN Comparaison
Comparaison détaillée côte à côte de SN75176 par Texas Instruments et ADM485JN par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ ActifComparaison des spécifications
| Paramètre | SN75176 | ADM485JN |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| Température de fonctionnement | 0 °C to +70 °C | — |
| Driver Output Current | ±60 mA (max) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| Boîtier | 8-pin PDIP (P) | 8-pin PDIP |
| Type de montage | Through-Hole | Through-hole |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | EIA RS-485 and RS-422 |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Tension d'alimentation | — | +5 V |
| Maximum Data Rate | — | 5 Mbit/s |
| Bus Common-Mode Range | — | +12 V |
| Driver Propagation Delay | — | 10 ns |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Driver Skew | — | Zero skew |
| Driver and Receiver Enable | — | Both driver and receiver can be enabled independently |
| Protection | — | Short-circuit protection and thermal shutdown protection |
| Process Technology | — | BiCMOS |
| Temperature Range | — | Commercial and industrial range |
| REACH Status | — | [DATA_NEEDED: REACH status] |