SN75176 vs SN75176BP Comparación
Comparación detallada lado a lado de SN75176 por Texas Instruments y SN75176BP por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ ActivoComparación de especificaciones
| Parámetro | SN75176 | SN75176BP |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Función | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| Temperatura de funcionamiento | 0 °C to +70 °C | — |
| Driver Output Current | ±60 mA (max) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| Encapsulado | 8-pin PDIP (P) | 8-pin PDIP (P) |
| Tipo de montaje | Through-Hole | Through-hole |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential bus transceiver |
| Supported Standards | — | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11, ITU X.27 |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Bus Modes | — | RS-422 and RS-485 |
| Bus Topology | — | Multipoint transmission |
| Driver Output | — | Three-state driver |
| Receiver Output | — | Three-state receiver |
| Tensión de alimentación | — | [DATA_NEEDED: supply voltage] |
| Logic Input Voltage | — | [DATA_NEEDED: logic input voltage] |
| Driver Differential Output Voltage | — | [DATA_NEEDED: driver differential output voltage] |
| Receiver Differential Input Voltage | — | [DATA_NEEDED: receiver differential input voltage] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Maximum Bus Length | — | [DATA_NEEDED: maximum bus length] |
| Maximum Node Count | — | [DATA_NEEDED: maximum node count] |
| Rango de temperatura de funcionamiento | — | 0°C to 70°C |
| REACH Status | — | [DATA_NEEDED: REACH status] |