SN75176 vs SN75176BP Comparaison
Comparaison détaillée côte à côte de SN75176 par Texas Instruments et SN75176BP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ ActifComparaison des spécifications
| Paramètre | SN75176 | SN75176BP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| Température de fonctionnement | 0 °C to +70 °C | — |
| Driver Output Current | ±60 mA (max) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| Boîtier | 8-pin PDIP (P) | 8-pin PDIP (P) |
| Type de montage | Through-Hole | Through-hole |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential bus transceiver |
| Supported Standards | — | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11, ITU X.27 |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Bus Modes | — | RS-422 and RS-485 |
| Bus Topology | — | Multipoint transmission |
| Driver Output | — | Three-state driver |
| Receiver Output | — | Three-state receiver |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage] |
| Logic Input Voltage | — | [DATA_NEEDED: logic input voltage] |
| Driver Differential Output Voltage | — | [DATA_NEEDED: driver differential output voltage] |
| Receiver Differential Input Voltage | — | [DATA_NEEDED: receiver differential input voltage] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Maximum Bus Length | — | [DATA_NEEDED: maximum bus length] |
| Maximum Node Count | — | [DATA_NEEDED: maximum node count] |
| Plage de température de fonctionnement | — | 0°C to 70°C |
| REACH Status | — | [DATA_NEEDED: REACH status] |