SN75176ADR vs MAX485EESA+ Comparación
Comparación detallada lado a lado de SN75176ADR por Texas Instruments y MAX485EESA+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN75176ADR - RS-422/RS-485 Differential Bus Transceiver | Texas Instruments
SN75176ADR ✓ ActivoAnalog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ ActivoComparación de especificaciones
| Parámetro | SN75176ADR | MAX485EESA+ |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Differential bus transceiver | RS-485/RS-422 Transceiver |
| Supported Interface | RS-422 and RS-485 | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Encapsulado | 8-pin SOIC | — |
| Número de pines | 8 pins | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Communication Mode | Bidirectional | — |
| Bus Topology | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state output | — |
| Receiver Output State | 3-state output | — |
| Noise Environment | Designed for long bus lines in noisy environments | — |
| ANSI Standard | ANSI Standard EIA/TIA-422-B | — |
| ITU Recommendation | ITU Recommendation V.11 | — |
| Unit Price at Quantity 1 | USD 0.4602 as of 2026-10-29 | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Velocidad de datos | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Driver Slew Rate | — | Limited (low-EMI) |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| Encapsulado / Carcasa | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| Nivel MSL | — | 1 (Unlimited) |