SN75176ADR vs MAX485EESA+ Comparaison
Comparaison détaillée côte à côte de SN75176ADR par Texas Instruments et MAX485EESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN75176ADR - RS-422/RS-485 Differential Bus Transceiver | Texas Instruments
SN75176ADR ✓ ActifAnalog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ ActifComparaison des spécifications
| Paramètre | SN75176ADR | MAX485EESA+ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Differential bus transceiver | RS-485/RS-422 Transceiver |
| Supported Interface | RS-422 and RS-485 | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Boîtier | 8-pin SOIC | — |
| Nombre de broches | 8 pins | — |
| Type de montage | Surface Mount | Surface Mount |
| Communication Mode | Bidirectional | — |
| Bus Topology | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state output | — |
| Receiver Output State | 3-state output | — |
| Noise Environment | Designed for long bus lines in noisy environments | — |
| ANSI Standard | ANSI Standard EIA/TIA-422-B | — |
| ITU Recommendation | ITU Recommendation V.11 | — |
| Unit Price at Quantity 1 | USD 0.4602 as of 2026-10-29 | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Débit de données | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Driver Slew Rate | — | Limited (low-EMI) |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| Boîtier / Format | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| Niveau MSL | — | 1 (Unlimited) |