SN75176BDR vs ADM489AR Comparación
Comparación detallada lado a lado de SN75176BDR por Texas Instruments y ADM489AR por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | SN75176BDR | ADM489AR |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Obsolete |
| Product Type | Differential bus transceiver | Full-duplex differential line transceiver |
| Tensión de alimentación | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | EIA RS-485 and RS-422 |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| Rango de temperatura de funcionamiento | 0 °C to 70 °C | [DATA_NEEDED: Operating temperature range] |
| Encapsulado | SOIC (D), 8 pins | 14-pin SOIC, 3.90 mm width |
| Tipo de montaje | Surface mount | Surface mount |
| Recuento de pines | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Velocidad de datos | — | 250 kbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Minimum Input Impedance | — | 12 kΩ |
| EFT Protection | — | 2 kV |
| EFT Compliance | — | IEC 1000-4-4 |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Slew Rate | — | Slew-rate limited |
| Estado del ciclo de vida | — | Obsolete |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |