SN75176BDR vs ADM489AR 比較
詳細並排比較 SN75176BDR 由 Texas Instruments 與 ADM489AR 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | SN75176BDR | ADM489AR |
|---|---|---|
| 品牌 | Texas Instruments | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | Obsolete |
| Product Type | Differential bus transceiver | Full-duplex differential line transceiver |
| 供應電壓 | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | EIA RS-485 and RS-422 |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| 工作溫度範圍 | 0 °C to 70 °C | [DATA_NEEDED: Operating temperature range] |
| 封裝 | SOIC (D), 8 pins | 14-pin SOIC, 3.90 mm width |
| 安裝類型 | Surface mount | Surface mount |
| 腳位數 | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| 靜態電流 | [DATA_NEEDED: quiescent current] | — |
| 資料速率 | — | 250 kbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Minimum Input Impedance | — | 12 kΩ |
| EFT Protection | — | 2 kV |
| EFT Compliance | — | IEC 1000-4-4 |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Slew Rate | — | Slew-rate limited |
| 生命週期狀態 | — | Obsolete |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |